Homepage : Textile fixation machines : Rimslow Wash-X

Product Categories

Rimslow Wash-X

Wash-X 1600-2200   Continuous Fabric Washing and Coating

  • The Wash-X is a unit developed for the inkjet fabric printing. Could be also used in traditional screen printing.
  • Designed to provide continuous process of fabric preparation and fabric washing for the digital printing. Could be also used as post treatment machine or for colorization of fabrics.
  • The Wash-X are actually two machine incorporated into one unit. They are capable of coating and washing almost any kind of fabric due to unique design.
  • Coating: The amount of coating emulsion could be adjusted to suit all types of dyes, including reactive, acid and disperse dyes.
  • Washing: Continuous fabric washing suitable for all type of inks and is design to save as much water as possible.
  • The unit automatically feeds fabric into an coating/washing unit, drying the fabric after coating and winds the fabric into rolls at the completion of the process.
  • All units are exchangeable and works as as plug-in system.

FABRIC FEEDER

  • Fabric unwinding device with fabric tension roller for fabric rolls of 350mm
  • Fabric join bar with needle holder

COATING/WASHING

  • Stainless steel coating/washing unit
  • This unit could handle all fabrics of width up 1600-2200mm. Depends on machine model
  • The speeds of coating/washing and speed of fabric are adjustable according to used fabric. All set-ups are accessible using friendly touch screen.
  • Separate liquid tank allow easy exchange of used coating formula and is equipped with mixer for coating formula mixing and constant steering through coating process.
  • Washing with possible recycling of previously used water, waist tank, heated pre-wash basin. All incorporated into the same unit.

DRYER

  • The dryer is infra-red, double walled and is fully insulated to minimize any heat loss.
  • The heating and regulation are controlled via a digital temperature controller situated on the electrical cabinet
  • Small exhaust fan is situated on top of dryer.

BATCHING

  • Fabric re-winder can accommodate rolls up to 350 mm diameter and includes automatic speed control, which is regulated by a "dancing" bar.
  • The unit consists of scroll roller and one side fabric edge control.
  • All functions of the Precoat-W are controlled by PLC with programmable terminal in auto and manual mode. The control panel is located in easy to reach position.
  • All units are mounted on swivel wheels.

OPTIONAL FEATURES

  • Set of recommended spare parts
  • On site installation and training

View fotos from the product:

  Units  
Fabric Maximum Width mm 1600/2200
Maximum Temperature C 180
Maximum Speed linear m/hr Up to 100 (Linear meters)
Machine Length m 3.35
Machine Width m 2.5-3.2
Machine Height m 2.02
Tank Capacity L 100
Water Consumption L/hour 250
Power Supply   220/380V, 50Hz or 110V, 60Hz3 phase, neutral, earth wire, 100A
Power Consumption kW 37.0
Fabric Roll Diameter max. mm 350